 ProMedUSA Model UV SG7000 temporarily installed in QC Printing Sdn Bhd in Johor Bahru, Malaysia QC Printing Sdn Bhd in Johor Bahru, Malaysia has a huge printing plant, which has a ceiling height of over 30 feet. Louvers in either side of the plant allow fresh air to flow through the plant.
Even with the fresh air intake, the paint, lacquer and other VOC odours were extremely strong, and the management wanted to reduce those odours, if not eliminate them completely. We installed one ProMedUSA model UV SG7000T36 Ozone Generator on one side of the printing plant. QC added the fan to help circulate the ozone throughout the plant. The results were excellent. On that side of the plant, the VOC’s, paint and lacquer odours were substantially reduced. They are now planning to add a second Ozone generator to another area of the plant to eliminate odours in that room. We measured the residual Ozone level about a meter away from the UV SG7000 and it was 0.00ppm.
0 Comments
Your comment will be posted after it is approved.
Leave a Reply. |
|